Question for all,
Are/would the 80 series and GQ Swivel hubs (the ball) be in or around the same size?
cheers
jim
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Swivel hub question
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Swivel hub question
Nice gq swb ute chop with a huffer for the good times
Re: Swivel hub question
no 80series is ~2.3 to 2.6mm smaller in diameter than a GU.Reddo wrote:Question for all,
Are/would the 80 series and GQ Swivel hubs (the ball) be in or around the same size?
cheers
jim
they could be made to fit BUT the kingpin inclination is greater on a nissan and this would result in increased castor (which might be advantageous on a race truck. The dissadvantage is the knecked area on the nissan ball as it is only 55mm dia vs 60mm dia on a toyota, it is also longer and more prone to bending.
WWW.TEAMDGR.COM
WWW.SUPERIORENGINEERING.COM.AU
WWW.LOCKTUP4X4.COM.AU
WWW.SUPERIORENGINEERING.COM.AU
WWW.LOCKTUP4X4.COM.AU
Who is online
Users browsing this forum: No registered users and 2 guests