Suzuki Sierra
Posted: Fri May 01, 2009 8:17 am
When did zuki sierras go widetrack
Page 1 of 1
Posted: Fri May 01, 2009 9:09 am
89
Posted: Fri May 01, 2009 9:10 am
umm....i think its 88.
Posted: Fri May 01, 2009 9:13 am
I have widetrack with plastic flares and the plate in the engine bay says build April 88. It also has 4 pinion front diff standard and NT bolt pattern Driveshaft PCD.
Posted: Fri May 01, 2009 9:31 am
88.5
Posted: Fri May 01, 2009 11:06 am
1972?
Posted: Fri May 01, 2009 12:47 pm
Correct. Mine is a 88.5 WT but running NT flanges. Has the plastic flares.lockdup wrote:88.5
Posted: Fri May 01, 2009 1:48 pm
Mine is an 88 running metal flares and wt flanges, not sure on the 4 pinion front diff though, i hope so.
Posted: Fri May 01, 2009 2:43 pm
WT flanges and steel flares will equal two pinion front diff AFAIK.
Steve.
Steve.
Posted: Fri May 01, 2009 7:59 pm
Dang......anyone got a 4 pinion for sale?Gwagensteve wrote:WT flanges and steel flares will equal two pinion front diff AFAIK.
Steve.
Posted: Fri May 01, 2009 8:05 pm
got a hole car $1200 88w/t soft top new head gasket 'bit far for u. cheers ron
Posted: Fri May 01, 2009 10:38 pm
hijack
can someone please explain the 2 and 4 pinion thing??
thanks
-Pyro
can someone please explain the 2 and 4 pinion thing??
thanks
-Pyro
Posted: Fri May 01, 2009 10:52 pm
http://www.outerlimits4x4.com/ftopic170020.php
have a look here, it explains it and has a few good pics to help
have a look here, it explains it and has a few good pics to help
Posted: Mon May 04, 2009 9:47 am
You have auto lockers front and rear, so at a guess you will have had a 4 pinion centre fitted to the front. Though you can fit auto lockers to the front 2 pinon too. Did you take any pics when you replaced the springs and pins? Or do you remember what it looked like?Pyrotech wrote:hijack
can someone please explain the 2 and 4 pinion thing??
thanks
-Pyro
Layto....
Posted: Mon May 04, 2009 4:41 pm
Sorry to hijack but can I fit an auto locker with couplers and chromo fronts with a 2 pinion front? Reply via PM if you like.lay80n wrote:You have auto lockers front and rear, so at a guess you will have had a 4 pinion centre fitted to the front. Though you can fit auto lockers to the front 2 pinon too. Did you take any pics when you replaced the springs and pins? Or do you remember what it looked like?Pyrotech wrote:hijack
can someone please explain the 2 and 4 pinion thing??
thanks
-Pyro
Layto....
Posted: Mon May 04, 2009 5:01 pm
As long as it is for a 2 pinion front.
Posted: Mon May 04, 2009 7:06 pm
So ARB lockers can or cannot be put into 2 Pin carriers? It really wouldnt make sense for ARB not to adapt their lockers to a WT diff considering it is probably the most used sierra. (there is no challenge intended by that statement)
Posted: Mon May 04, 2009 7:44 pm
arb locker is the carrier, and they are available front and rear
Posted: Mon May 04, 2009 7:50 pm
ahh right... now i feel stupid 