Outer Limits 4x4 Board

Has anyone had experiences with tc with reduction gears twist and damage mounts etc with the extra stresses involved?

What are some of the ways to stop this happening?


Cheers

Many people have had this happen. Most get an aftermarket mounting sistem like a Mighty kong, calmini, spidertrax or rocktoy ring and beef up the brackets off the chassis.

I use a mighty kong with the unbreakable gorilla grip mounts (no longer available afaik).

Just_cruizin (and I) have just about got some new stye t/case mounts
Should work well. they will be std size, 1" and 2" lifted ones. We are testing now.

I just simply reinforced the original mounts, but filleting the small one, and welding on some 20x20 RHS lengthways on the long one, never had any problems. Still using oem rubber mounts too.

thanks everyone for the advice

Bruceh , do you have some more info on the mounts you are testing?

Cheers

vandle wrote:thanks everyone for the advice

Bruceh , do you have some more info on the mounts you are testing?

Cheers

I'm sure Greg will post up pictures soon mate. We at the testing stage. This is really Greg's baby so he will tell all soon I guess. Don't want to get it out there yet till we know it works.

Thanks for the update Bruceh

Looking forward to the results.

Cheers

vandle wrote:Thanks for the update Bruceh

Looking forward to the results.

Cheers

Fitted a std setup today in one of my stock zooks with Greg (Just_cruizin).
So far so good. Little bit of mucking around (being the first one fitted) but overall these look likethey will work. They will be avail as a std height, 1" and 2" heights. All bolts washers and full instructions will come with kit. I'll leave this now and let Greg do the rest. From what Greg has been telling me there are quite a few zook lovers waiting for these.

Sounds good

keep us updated

cheers

As Bruce has said we have finally got a couple of sets in the R&D stage, we really need to get out and punish them to ensure they hold up to everything we throw at them. Just be aware though this modification will not be reversible. Not my preference when doing mods but this one unavoidable to get a 100% result.

This will be bullet proof if installed correctly and will available in three sizes, standard, 1" and 2".

Not reversable at all? Is it welded on or something?

Zook_Fan wrote:Not reversable at all? Is it welded on or something?

who cares half of what we do to our zooks is nor reversable.As long as it work great,bring them on

You need to drill 25mm holes in the chassis mounts and transfer brackets.

sorry for the hi jack but i dont want to start a new thread,

I just got quoted a shyt load to get the transfer out of my wt re built. Does anyone have any idea of what the cost would be?

Any help would be appreciated

Cheers

Do it yourself. The info is all on here and rebuild kits are cheap from locktup4x4

Hi Greg

Thanks for the info on the tc mount

You also mention body lift kit for swb sierra
can you give some info on the kit.

cheers