Page 1 of 1
80 series steering damper which one
Posted: Sat May 09, 2009 11:35 am
by ferg640
could somebody give me some feedback on steering dampners for an 80 series.Do i go standard aftermarket or return to centre.Also what brand are people using.Thanks for any help.
Posted: Sat May 09, 2009 12:18 pm
by dirty harry
i have a old man emu on my 80 works fine,
i haven't had a return to center one on any of my 4wd's ,
but looks like a lot of money for a shock with a spring
Posted: Sat May 09, 2009 12:21 pm
by DIRTY ROCK STAR
I dont run one.
there is alot of info in gen tech not long ago where a guy was asking similar Q's.
i think most people agreed RTC is a waste of $$.
Posted: Sat May 09, 2009 12:32 pm
by crankycruiser
RTC is a watse of money, it just masks problems, if ur castor is right then u wont need one..
Posted: Sat May 09, 2009 8:23 pm
by udm
rtc big waste of space
Posted: Sun May 10, 2009 10:42 am
by chunks
Just get a normal heavy duty one mate e.g. Dobinsons, EFS Xtreme, Bilstein etc. If your truck has shimmy or is wandering you have other issues that need addressing.
thanks
Posted: Sun May 10, 2009 11:59 am
by ferg640
hey fella's thanks for your comments.This has confirmed what i was thinking.Will go for a large bore one probably tough dog.Thanks again for the help