Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Will 80s diff bits swap into a 100s rear housing??

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 94
Joined: Mon May 07, 2007 5:29 pm
Location: A.C.T

Will 80s diff bits swap into a 100s rear housing??

Post by luxembuger »

Hey all, I'm currently swapping a 100s diff into the rear of my lux. It'll be a piece of piss they said... yeah right! Couple of dramas, firstly the 100 has 5 stud wheels, secondly 15in rims don't fit over the 100s brakes. So because I have the 100 housing already i'm wondering if the 80 bits will fit the housing, such as the brake assy and axles etc. Any tips are appreciated!!
Cheers, Chris.
97 DC lux
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

im pretty sure the brakes will fit (but obviously u will need the 80 hubs) but u cant fit 15" wheels on the rear of a post 93 80 anyways... ...

and because u have used the 80 hubs u would need to use 80 axels. (not sure if spline is the same) or put 10mm studs in the 80 hubs...
Top
Posts: 94
Joined: Mon May 07, 2007 5:29 pm
Location: A.C.T

Post by luxembuger »

I see, thankyou very much CC and thanks also for answering the Q I forgot to include in my post about which model 80 15in rims would fit onto... Well looks like a few more bits n pieces to collect yet.
Cheers again CC.
97 DC lux
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 6 guests