Page 1 of 1

CV circlip- needed or not??

Posted: Sun May 10, 2009 5:40 pm
by danssurf82
i have a 94 vitara independent front, snapped a cv last night.

have spare cv off a 96 model, the shaft is about 4-5mm shorter and i cant put the washer and circlip on it.

should i just leave the washer out and just put the circlip on? or will the circlip just break?

or just leave it off completely??

cheers john

Posted: Sun May 10, 2009 10:08 pm
by Petesarmy
never tried it but im sure you will need both and if you put it toegther and dont get away with it, the result wont be good.

Posted: Mon May 11, 2009 4:54 pm
by danssurf82
cheers mate got mine reco today...

i know some ppl with sierra's dont use circlips but their axels are fully enclosed so they cant just fall out...

Posted: Tue May 12, 2009 8:57 am
by atari4x4
running with out the circlip allows the axle to move in the spindle & allows crap/dirt into the seal/bearings = bad sh!t happens.

Posted: Wed May 13, 2009 8:58 pm
by danssurf82
cheers mate might justr keep my spares as SPARES and use them only in an emergency if i get stuck in the bush-better than nothing i suppose,... right?