Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

do i need lift?

Tech Talk for Jeep owners.

Moderator: GUtripper

Post Reply
Posts: 396
Joined: Tue May 12, 2009 3:03 pm
Location: Sunshine coast

do i need lift?

Post by Middo »

hey im gunna put 32"maybey 33" tyres on my wrangler and i was wondering if any how much lift i would need to fit them in? cheers
Posts: 1253
Joined: Thu Dec 12, 2002 1:34 am
Location: QLD

Re: do i need lift?

Post by Jeeps »

Middo wrote:hey im gunna put 32"maybey 33" tyres on my wrangler and i was wondering if any how much lift i would need to fit them in? cheers
Basically, to fit 33's the absolute minimum you will need is a 2" (50mm) total of lift for street use and 3" (75mm) total if you want to take it offroad. To achieve 3" of lift you can either get a 3"+ suspension lift or a 2" suspension lift + a 1" body lift. If you go with a full 3"+ suspension lift (not the 2" lift + 1" bofy lift) you will also need to get a SYE & driveshaft for a 3" lift because anything a 3" suspension lift puts too much angle stress on the factory output shaft for regular offroad use.

For 32's you can get away with a 2" lift.

You need to get new rims & fender flares to accomodate the wider rubber also.

3" lift up to $1500
SYE $1100
Flares $800
Rims ?$'s

etc

cheers
Posts: 396
Joined: Tue May 12, 2009 3:03 pm
Location: Sunshine coast

Post by Middo »

oh ok sweet. uv been heaps of help. thankyou muchly. cheers
Posts: 4
Joined: Tue May 26, 2009 2:47 pm
Location: kulim

Post by frank lampard »

i don't think so.You don't need it!!

_________________________
Body Acne Causes and Cures
Free Liposuction
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest