Page 1 of 1
bellhousings and fitting a 2H to a FJ60 to replace the 3F
Posted: Thu May 14, 2009 7:18 pm
by lokka
Will the bell housing from the 4 speed box fit the later 5 speed box ??? . As i have a good 2H with 4 speed and id like to stick it in my FJ62 in place of the 3F and id like to keep the 5 speed ... Is this worth doing and is it possible to replace the 3F with the 2H ?? .. I have the complete HJ60 to take all the bits from so i cant see it being all that bad who has done this and is it worth doing...
Posted: Fri May 15, 2009 10:04 am
by vk7ybi
What? Wheres your "?" and "." keys?
Posted: Fri May 15, 2009 10:27 am
by hiluxmad
4 speed amd 5 speed are the same bolt pattern at the box/ bellhousing join but cant remember if clutch slave is on opposite sides or not
Posted: Fri May 15, 2009 1:38 pm
by lokka
hiluxmad wrote:4 speed amd 5 speed are the same bolt pattern at the box/ bellhousing join but cant remember if clutch slave is on opposite sides or not
Cool il have a look see once i get it out if the 4 spped bell fits the 5 spped im laughing other wise ilhave tohunt down a 5 spped 2h housing and clutch slave
Posted: Fri May 15, 2009 1:40 pm
by lokka
vk7ybi wrote:What? Wheres your "?" and "." keys?
WTF ????
Now i have had a better read of the posts in this thread i have fixed the original question for the punctuation n00bs ...
I was always told that if you cant say anything polite or use full to another person keep your fawkin mouth shut
Posted: Sat May 16, 2009 3:02 pm
by richardsc
b 4 speed are u referring too an auto or manual
Posted: Sat May 16, 2009 3:04 pm
by GanG
lokka wrote:vk7ybi wrote:What? Wheres your "?" and "." keys?
WTF more info please and kays on what the 3f that comin out or the 2h i want to put in ????
I think what vk7ybi is saying is your post was missing some punctuation that would have enhanced its readability, as opposed to presenting a solid block of text requiring the reader to guess where sentences started and stopped and exactly what questions you were asking .
Posted: Sat May 16, 2009 3:18 pm
by Jacked
GanG wrote:lokka wrote:vk7ybi wrote:What? Wheres your "?" and "." keys?
WTF more info please and kays on what the 3f that comin out or the 2h i want to put in ????
I think what vk7ybi is saying is your post was missing some punctuation that would have enhanced its readability, as opposed to presenting a solid block of text requiring the reader to guess where sentences started and stopped and exactly what questions you were asking .
lol i think he was just sticken it to/in the man, punctuation is for n00bs
Posted: Sat May 16, 2009 5:26 pm
by lokka
richardsc wrote:b 4 speed are u referring too an auto or manual
Its a 4 speed manual from the early hj60 and it has the extra lever for over drive ...
The box i have in the fj62 is the later type 5 speed with the vac operated 4WD ...
Posted: Sat May 16, 2009 10:40 pm
by hiluxmad
the vac opperarated transfer can be a PITA to retro fit into something else.
but if you know what your doing and have all the bits and wiring etc. no reason why it wont work
Posted: Sun May 17, 2009 1:19 am
by lokka