Page 1 of 1
divorced transfercase adapter
Posted: Sat May 23, 2009 10:41 am
by macktuff
just thought l'd let everyone noe bout this web page l found while looking for a suitable gearbox to bolt upto a turbocharged supra engine for my hilux might be good for using the stock transmission that comes with the engine and using ADAPTER FOR TRANSFER
just a thought
http://www.ottindustries.com/divorcetoyota.htm
Posted: Sun May 24, 2009 7:55 pm
by v8zuki
how cool is that i needed that 3yrs ago would have made life easy
Posted: Sun May 24, 2009 8:51 pm
by Struth
What does it actually do?
Cheers
Posted: Sun May 24, 2009 10:21 pm
by macktuff
This adapter allows you to add a driveshaft input to your Reliable and Adaptable Toyota transfercase.
*
The flanged input is supplied drilled for standard metric small and large (Suzuki/ Toyota) or left blank for your own needs.
* Kit is supplied as an assembled plate with flange, heavy duty bearings, and all metric fasteners.
from wat they saying you use 2wd gearbox driveshaft flange bolt it to adapter driveshaft flange then bolt to transfer
would probably require custom brakets to be made but if you put a 1jz,2jz 1uz you could probably use the gearbox that came with the engine if its an import half cut
still waitning for reply from company
Posted: Mon May 25, 2009 2:42 am
by locktup4x4
The ones I've seen are nicely built units. I know of one that is going to be used on a 6 wheeled rig.
Jason