Page 1 of 1
Problem with Twine shower
Posted: Sat May 23, 2009 12:55 pm
by DX 80
I got a Twine installed. It appears the pump has shat itself.
Pump runs but will not draw water. Am I correct to assume it's rooted and source a new one?
Dave.
Posted: Sat May 23, 2009 1:14 pm
by PJ.zook
First make sure everything is perfect, as in the draw pipe is definately not blocked and no kinks, and disconnect the outlet pipe, see if anything flows.
Also try to directly connect pump to battery to make sure a connection or lead hasnt burnt out and youre getting massive voltage loss.
Posted: Sun May 24, 2009 9:48 am
by DX 80
I spoke to a bloke at Twine yesterday and he suggested the diaphram could be rooted. I stripped it down and all seems to be ok.
Does anyone know where to source (apart from Twine) a shurflow pump?
Dave.
Posted: Sun May 24, 2009 12:59 pm
by ddr
Google is your friend here, but any caravan or boat place will have them. Id take it out & replace the piping too it to see if it will pump water then.
Also if there is an air leak in the line it wont draw any water.
Posted: Sun May 24, 2009 1:02 pm
by fool_injected
Sureflow gear @
www.biasboating.com.au
REGISTER for their mailing list, every 3month you get the latest cattledog
Might be a boating store but they have lots of gear to deck out 4x4s and campers
Posted: Sun May 24, 2009 1:51 pm
by DX 80
Changed the pipe that goes to the inlet, stil nothing.
Will got to a boating shop and sus it this week I think.
Posted: Sun May 24, 2009 11:11 pm
by turps
Rays Tent City and BCF stores have them last time I was in there.
pump parts
Posted: Thu Jun 04, 2009 8:47 am
by MUD CLUB
Give Greg at PUMPS n SPRAYS at riverstone 9627-9898
tell him you got the number from Grant at CHEMICAL CLEANING SOLUTIONS
Posted: Fri Jun 05, 2009 5:40 am
by DX 80
Cheers Mud Club