Page 1 of 1
2000 1HZ TROOPY
Posted: Sun May 24, 2009 10:36 pm
by MART
After a schematic of the gearbox and transfer case please , or a link , wanting to know if the gearbox shaft connects directly to transfer , gearbox and transfer shift correctly , but the truck no movy , the output on the transfer vibrates , Cheers Paul.
Posted: Mon May 25, 2009 1:11 pm
by mickbeny
Hi all...Mart,Yes,Its a 2 peice shaft.
Posted: Mon May 25, 2009 4:31 pm
by SimonInAustralia
Sounds like it could be the 2 piece output shaft that has stripped splines.
This is a known problem with these gearboxes up until the factory fixed them sometime in 2002 or 2003.
The fix is a stronger single piece output shaft.
I put some info about it up on another forum...
http://forum.ih8mud.com/70-series-tech/ ... ost4355744
Probably too late for Toyota to fix it for free, but I would try anyway.