Page 1 of 1
power steeing on a cj7
Posted: Wed May 27, 2009 12:06 pm
by known 2
howdy all. are power steering kits available for cj7's and are they easy to fit?
Posted: Wed May 27, 2009 4:46 pm
by AussieCJ7
If you have manual steer then a power steer box from a FSJ will bolt straight in
Almost any jeep power steer box will bolt to the frame but the challenge is matching the steering shaft they all have different size input shafts and spline count
Ring Mascot motors, Hammonds Jeep, Hunter 4x4 wreckers, Jeeepparts recylers or USA 4x4 for parts
Posted: Wed May 27, 2009 6:49 pm
by ian1974
i have a fsj box cost ya a bottle of bundy.. no pump
Posted: Wed May 27, 2009 7:33 pm
by known 2
i'll get back to you on that mate. could be a go'er.
though i thought most cj7's came with it from factory.
Posted: Wed May 27, 2009 8:53 pm
by AussieCJ7
known 2 wrote:i'll get back to you on that mate. could be a go'er.
though i thought most cj7's came with it from factory.
most but not all
mine was a povo pack with 4cyl that was tarted up by local dealer with renegade pack option such as tach and clock but no power steer
I bolted in a FSJ box when I did my 4.0L engine conversion
Posted: Thu May 28, 2009 8:39 pm
by known 2
will a power steering pump of a 360ci v8 run this box or should i seek something stronger to steer 35's?