Page 1 of 1
Axel lengths
Posted: Wed May 27, 2009 10:29 pm
by nottie
Ok guys just wondering if anybody knows the lengths of the 27/30 spline ranges of yota axels. Hilux bundy series dont matter as long as they are a 27/30 spline then i need lengths on short side and long side.
I know its an odd ball question but will help on a convertion i am doing.
Cheers Nottie
Posted: Thu May 28, 2009 10:47 am
by nottie
Gee guys i thought for shore you all would have axels laying around that you could throw a tape on?
Posted: Thu May 28, 2009 11:32 am
by hulsty
Search,
FYI - Inner Axle Lengths (without birf attached, measured from end to end):
40/55/70 Series Drivers Side: 29.00"
40/55/70 Series Passenger Side: 17.25"
60/62 Series Drivers Side: 31.5"
60/62 Series Passenger Side: 17.25"
80 Series Drivers Side: 34.125"
80 Series Passenger Side: 17.75"
PU/4Runner (Solid Axle) Drivers Side: 31.5"
PU/4Runner (Solid Axle) Pass. Side: 15.375"
Posted: Thu May 28, 2009 8:16 pm
by SimonInAustralia
hulsty wrote:Search,
FYI - Inner Axle Lengths (without birf attached, measured from end to end):
40/55/70 Series Drivers Side: 29.00"
40/55/70 Series Passenger Side: 17.25"
60/62 Series Drivers Side: 31.5"
60/62 Series Passenger Side: 17.25"
80 Series Drivers Side: 34.125"
80 Series Passenger Side: 17.75"
PU/4Runner (Solid Axle) Drivers Side: 31.5"
PU/4Runner (Solid Axle) Pass. Side: 15.375"
Approximate measurements (suspect tape measure and tape measurer)...
HZJ78 Right Side: 420/421mm (16.53/16.57")
HZJ78 Left Side: 775/776mm (30.51/30.55")
...couldn't decide if it was one or the other, or in between.
Posted: Thu May 28, 2009 8:19 pm
by bubs
bundera inner axle lengths
short side - 410mm
long side - 770mm
Buddy
Posted: Fri May 29, 2009 6:51 pm
by nottie
Thanks heaps for that guys
I did try for hours searching but got no where.