Outer Limits 4x4 Board

Hi all need some help , i have a 6/85 hj60 saraha 2H diesel.
i'm swapping a 2H in from a 4/84 hj60 but the chassis engine mounts on the passenger side are 20 mm furuther back in the 6/85 saraha.
can anyone offer any advice please

That sounds weird sure ya got it on the right way and the engin in all the way 20mm isnt far maby u could fudge it in as i cant see them being different ...

But il watch this one with interest as im about to fit a 2h from an early 80's (82 i think) into my 85 FJ60 were the 3f now sits ...

the engine is definantly the same

swap mounts off the engine?

you do know that the 2H does not sit straight in the engine bay??

the 2H runs on a slight diagonal from the front passenger corner back towards the drivers side,

im just wondering if u are trying to put the motor in straight?

i wasnt aware of this until i did an engine swap a few weeks ago, and noticed it before i pulled the motor out.

maybe thats the problem?

-Pyro

Thanks for the help ,it was that the motor being on a slight angle had me buggered it just didt look right

stephen