Page 1 of 1

NEEDED asap

Posted: Sat May 30, 2009 2:42 pm
by dmrbikes
HEY GUYS I HAVE A 1987 DIESEL ROCKY AND I AM AFTER THE FOLLOWING TRANSFER CASE GEARS..

IDLER GEAR

HIGH RANGE OUT PUT SHAFT GEAR...

IF ANY BODY HAS ANY OR KNOWS WHERE I CAN GET THEM PLEASE GET BACK TO ME ASAP...
THANKS

Posted: Sat May 30, 2009 5:10 pm
by dai-hard
I needed the hi rage output gear couldnt get one anywhere.

Had to get a whole transfer.

Posted: Mon Jun 01, 2009 11:57 pm
by Doc_Acos
I have heard you can get gear sets from Bursons, otherwise you could probably get a gearbox company to rebuild it can be exxy though.

If you call around some gear makers, some of the smaller ones can knock them up for you pretty cheaply if it is a standard tooth size, etc. Although they would need the gears to duplicate them.

Worth a phone call or two.

Picking them up from a wrecker is a pain these days, is they deal in Rocky parts, they know how much they are worth....

Posted: Tue Jun 02, 2009 7:37 am
by RockyF75
Does your transfer case have a manually engaged 4x4 low, or push button?

Either way should have the full transfer here, might be willing to sell just the gears.

Posted: Tue Jun 02, 2009 6:14 pm
by dai-hard
The push button and manual select run the same gearset.

I just changed mine fron button to manual.


Best thing i ever did. :lol:

Posted: Tue Jun 02, 2009 6:16 pm
by RockyF75
No worries, I thought they had different ratios.