Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

type of metal for ute chop

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 156
Joined: Thu Feb 14, 2008 5:18 pm
Location: brisbane/Logan

type of metal for ute chop

Post by biggsy »

Going to start a ute chop on my Patrol.. Having trouble getting the rear sheet for the truck,so I have decided to get some metal from My sheet metal worker... Just wondering on what size and type of metal sheet Do I get..
v8-gq
Top
Posts: 580
Joined: Mon Jul 18, 2005 5:53 pm
Location: Toowoomba QLD

Post by mud_runner_GQ »

i used a 3mm sheet of plate
RIP BAXTER YOUR IN OUR HEARTS FOREVER
Vehicle: Red shorty short gq patrol..... with a bucket of cash spent on it
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

1.6mm is enough, I have used 2mm but it was a little thick to shape.
Top
Posts: 156
Joined: Thu Feb 14, 2008 5:18 pm
Location: brisbane/Logan

Post by biggsy »

Cheers guys,is just normal sheet metal. ( just after a type or grade of metal) I use alot of zinc sheet in my line of work but I dont think thats suitable even though I think it would do the job
v8-gq
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests