Outer Limits 4x4 Board

Hi guys,

Just getting the car finished for the weekend and need to know if there is enough movement in the ball joint if I put the ball joint end of the draglink on the top of the pitman arm.

the Draglink touches the tie rod and I need a bit more clearance and I think this will do it, but just want to make sure I won't run out of movement.

Cheers.

Pitman arm is too long it sounds like. Try using a 2wd one.

the tapered hole in the pitman arm would be around the wrong way, would it not?

Thats what i would think, no chance of it fitting.

80's_delirious wrote:the tapered hole in the pitman arm would be around the wrong way, would it not?

X2 it wont work, taper would be wrong way

I realised that when I took the arm off and tried it, thanks anyway guys

Might try a 2wd one of a flat pitman arm.