Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
front wheel bearings and swivel hubs
front wheel bearings and swivel hubs
im redoing my front bearings and painted up the swivel housings. is the swivel housing meant to be full of grease or just the bearing or what i had two different situations on each side so dont know how its meant to be?
Pack it up with grease. get as much as you can in there, pack it up then slip it over the CV and then pack more in and around it. The bearings have to be packed with grease as well but they are in a different section to the swivel hub.
..wrench, wheel, wreck repeat..
check out the action @ http://www.darwin4x4.net
check out the action @ http://www.darwin4x4.net
And they need different grease from memory -
LMM on the CV's and HTB on the bearings.
You pretty much can't put too much grease in and around the CV's. You'll use most of a 500g tub on both front CV's ( 250g each)
Steve.
LMM on the CV's and HTB on the bearings.
You pretty much can't put too much grease in and around the CV's. You'll use most of a 500g tub on both front CV's ( 250g each)
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 1 guest