Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Gauges not working

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 365
Joined: Mon Aug 18, 2003 1:03 am
Location: Perth

Contact:
Contact Shark

Gauges not working

Post by Shark »

Was working on my car today installing a cb and wiring up the air con compressor and when i went for a drive my oil pressure/fuel and temp guage isnt working. EVERYTHING else is working in the car. Have checked fuses etc.

Anyone have an idea??

Marc
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

disconnect wiring to compressor and CB radio and resort to existing wiring to determine if that was the problem.

If so,, then you may have to run a new connection direct from the battery with a fuse to provide independant power for compressor and CB??

Just an idea :?:
Top
Posts: 13
Joined: Wed Feb 04, 2004 7:49 pm
Location: Adelaide.... The only place you dont wanna be with a 4x4....

Contact:
Contact voxson

Post by voxson »

Did you knock one of your printed circuit plugs outta the back of your dashboard...>?
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

voxson wrote:Did you knock one of your printed circuit plugs outta the back of your dashboard...>?


How would he do that just wiring up the CB and the compressor???

:?
Top
Posts: 365
Joined: Mon Aug 18, 2003 1:03 am
Location: Perth

Contact:
Contact Shark

Post by Shark »

Hmmm the compressor has all new wiring and the cb has power from the same wire that is running the stereo. Gonna have a good look today but really have no idea where to start.

Marc
Top
Posts: 365
Joined: Mon Aug 18, 2003 1:03 am
Location: Perth

Contact:
Contact Shark

Post by Shark »

Had a really good look today and could not find the problem, so who would i take it to to fix, an auto elec???



Marc
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

Yer prolly an auto lekky would fix it without dramas.

Tom
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

you will find it will be something simple and the auto elec will have it fixed up and sweet in 10 mins :D
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 625
Joined: Fri Feb 20, 2004 12:04 am
Location: Melbourne

Post by Woop »

Where have you connected the wire to that youve got feeding your CB and compressor?

NickW
Top
Posts: 365
Joined: Mon Aug 18, 2003 1:03 am
Location: Perth

Contact:
Contact Shark

Post by Shark »

All new connections were done properly, dont know where i could of stuffed up :armsup:

Marc :D
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 47 guests