Page 1 of 1

F300 Black Box

Posted: Sun Apr 25, 2004 9:13 pm
by dlj123
hi
read all info on K&N etc. Unfortunately i have not got black box just normal car pancake air filter. Should i fit black box if so how or should i adjust what i got

Posted: Sun Apr 25, 2004 10:07 pm
by rocknferoza
Is your feroza carby or fuel injected :?:

If It's got a carby then you wont be able 2 fit a black box 2 it.


James

Posted: Sun Apr 25, 2004 11:37 pm
by Goatse.AJ
Firstly, I will assume you are running an EFI Feroza.

The question is, what kind of wheelin' and road driving do you do, and what size tyres are you running?

If you're running standard tyres, then I wouldn't worry too much about it. If you're doing a lot of rock-crawling in steep country, then it will probably help to have it. Although you will find you top-end performance may suffer a bit.

You should be able to find one from a wrecker or even from Daihatsu as a guenuine replacement part....it should just bolt straight on to the top of your motor, even the motor from the Applause has the bolts and holes in the right place.

Good luck,

Posted: Mon Apr 26, 2004 7:54 am
by dlj123
:cry: now very sad
is there nothing i can do to my old fashioned carb model

Posted: Mon Apr 26, 2004 11:51 am
by murcod
The extractors for the EFI model will fit- you'll just need to plug up the oxygen sensor hole (easy job). There may even be extractors made to suit the HD-C engine without the threaded hole?

You may be able to find a K&N filter to suit as well. It all depends on what size the HD-C engine filter is - K&N make a huge of filters.