Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

pitman arm

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 3
Joined: Sat Jun 13, 2009 1:38 pm
Location: Roxby Downs

pitman arm

Post by 84hiluxrogers »

hey guys can you tell me where i can get a pitman arm for a 84 hilux with a six inch lift kit because mine hits on the spring hanger
cheers
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

You mean drag link? Superior, Snake are the ones that come to mind.
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 3
Joined: Sat Jun 13, 2009 1:38 pm
Location: Roxby Downs

Post by 84hiluxrogers »

cheers mate i only just bought it and the bloke just told me wot he thought it was. what is the drag link. is that what u had to do on yours?
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

Hi mate, I don't run 6" of lift in mine, I have 3-4" and run 35"s with no rubbing.

If you want to get serious, look into getting a high steer setup.

Or just buy the dropped drag link.

http://www.superiorengineering.com.au/p ... ts_id=3693
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 1650
Joined: Wed Jun 06, 2007 10:12 pm
Location: ipswich

Contact:
Contact sloshy

Post by sloshy »

I would go crossover with a lift that big. A drop drag link won't fix it.
Last edited by sloshy on Mon Jun 15, 2009 9:22 pm, edited 1 time in total.
cheers Dan

Licenced Carpenter
I do everything, free quotes
Brisbane west/Ipswich/rural
PM me
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

sloshy wrote:I would go crossover with a lift that big. A drog drag link won't fix it.
I wouldn't run a lift that big in a hilux :D
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 3
Joined: Sat Jun 13, 2009 1:38 pm
Location: Roxby Downs

Post by 84hiluxrogers »

did you guys have to do any of this??
Top
Posts: 292
Joined: Wed Jan 09, 2008 12:20 pm
Location: Ipswich

Post by hilux79 »

I ran one and bent it in 2 trips. It hit the U bolt. I only have about 3" in the front of mine so on a taller truck they may be better. My advice would be to get high steer or crossover and only spend your money once cause you will end up going that way if you want a flexy front end anyway.
Ben
Top
Posts: 764
Joined: Wed Sep 07, 2005 10:59 pm
Location: STOCKTON NSW

Post by lokka »

hilux79 wrote:I ran one and bent it in 2 trips. It hit the U bolt. I only have about 3" in the front of mine so on a taller truck they may be better. My advice would be to get high steer or crossover and only spend your money once cause you will end up going that way if you want a flexy front end anyway.
yep muchly aggreed spend your cash at superior u wont regret it :D :D
Cheers

Chris

Questions $20ea Answers for said Questions $100ea
I can fix your F'ups for a fee .......
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest