Hey guys,
I got a 1HZ with about 163k on it, probably the healthiest motor i have seen, its just lacks the power, naturally.
I am looking at running a turbo with about 6-8 psi.
I am looking at T28 ball bearing turbo with a 3" mandrel bent. Just wondering who else has done a similar upgrade?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
79 series 1HZ turbo conversion
Moderators: toaddog, Elmo, DUDELUX
mine has had a denco unit fitted for years. it now has around 420,000 on the clock still goes hard runs economically and used stuff all oil.
I run Max 11lb boost and its all good I cruise light throttle around 4-5 lbs moderate throttle around 8lb and hard throttle it boosts straight up to 11-12lb it spikes to 12 the drops and settles on 11.
I run Max 11lb boost and its all good I cruise light throttle around 4-5 lbs moderate throttle around 8lb and hard throttle it boosts straight up to 11-12lb it spikes to 12 the drops and settles on 11.
Who is online
Users browsing this forum: No registered users and 2 guests