Page 1 of 1
Wanted, pics/info on driving lights mounted IN bullbars
Posted: Sun Jun 14, 2009 7:11 pm
by jet-6
Guys looking for some info and pics on mounting driving lights "IN" your bullbar
Looking to mount a set of LF170's and a set of LF140's in the side wings of my bar, but need some help
Matt
Posted: Sun Jun 14, 2009 7:52 pm
by Weiner
Cut the right sized hold for them and weld on some tabs to mount them to, just make sure you have room for the lights behind the bar before cuttting.
Posted: Sun Jun 14, 2009 9:07 pm
by ferrit
going to be a pretty massive bullbar to fit a LF170 IN it!
Posted: Sun Jun 14, 2009 9:17 pm
by fester2au
That's what I was thinking too. Not much meat left in the bar if you can actually get a 170 in there.
If you want to get really flash cut the hole slightly bigger, get a bit of flat bar, say 12mm, roll it into a ring and weld that into the hole and sand the faces smooth.
Posted: Sun Jun 14, 2009 10:48 pm
by jet-6
The hole in my Sahara bar is almost 150 at the large end as it is, there is heaps of room, i just wanted to see some pics of it done before i make my brackets and front cover