Outer Limits 4x4 Board

Hey All, sorry to ask a common question but iv made body blocks for my 80 series to lift it 50mm, now i need step by step instuctions. i no iv seen it on here before i just cant find the posts, so could someone put the link up for 1 or tell me please. thank you.

Cheers Wade

http://www.outerlimits4x4.com/ftopic166 ... highlight=

this is mine but there is another one on here that has a more step by step

I believe you are referring to LBDs writeup;
http://lbd.end0.net/

Have fun!

oo cheers mate,

It was yours that i was thinking about, just couldnt remember where it was lol cheers ill read though it now. you take any pics when you did it??

cheers Wade

do the front and rear block have to be differnt hight or they mean they are just differnt diamator, because mine are all the same, and whats the best size for the bolts,

cheers Wade

hey all,

I think i worked out how to do the lift one other thing tho,
just wondering how to lift a arb deluxe winch bar, the best way because
it slots stright over the chassi so not sure how to do this thanks

Wade

all blocks need to be the same height, bolts are of course going to be a standard size just longer - go high tensile and consider electroplating however, be careful of hydrogen embroilment.

as for the bar, might be a good time to consider a custom/home made job, otherwise you will need to cut up that nice ARB bar.

lucky im a boil maker ill cut it up lol


thanks for all your help