16x8 rim with 120mm offset ok for a 60 series
Posted: Mon Jun 15, 2009 6:50 pm
i dont no much about offsets but im after 16x7 rims for a 60 series cruiser.
is 120mm offset ok?
is 120mm offset ok?
Outer Limits 4x4 Board
Aussie Hardcore Wheelers
https://outerlimits4x4.com.au/
16x8 rim with 120mm offset ok for a 60 series
Page 1 of 1
Posted: Mon Jun 15, 2009 7:27 pm
I just ordered a set of 16x8s for my Hilux and went neg25 offset which should also fit a 60 series, hope that helps
Posted: Mon Jun 15, 2009 7:52 pm
found this should help you understand off set.
So the ones I have ordered are a -25 which would put the mounting face 25mm behind the "centreline" of the rimsZero Offset
The hub mounting surface is even with the centreline of the wheel.
Positive
The hub mounting surface is toward the front or wheel side of the wheel. Positive offset wheels are generally found on front wheel drive cars and newer rear drive cars.
Negative
The hub mounting surface is toward the back or brake side of the wheels centreline. "Deep dish" wheels are typically a negative offset.
If the offset of the wheel is not correct for the car, the handling can be adversely affected. When the width of the wheel changes, the offset also changes numerically. If the offset were to stay the same while you added width, the additional width would be split evenly between the inside and outside. For most cars, this would not work correctly.
Posted: Mon Jun 15, 2009 7:56 pm
thanks man yep that helps!
Posted: Mon Jun 15, 2009 10:17 pm
What sorta rims u after i have some 16x8 cruiser offset alloys NEG 25 offset there shod with 265x75x16 bfg muds im thinking bout selling theres 5 off if ya interested PM me