Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60 clutch issues

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 8556
Joined: Mon Jun 13, 2005 9:34 pm
Location: Sydney

60 clutch issues

Post by RockyF75 »

Over the last few weeks my clutch pedal has been slowly going down till the friction point was pretty much at the firewall.

Lost it completely this morning and found the fluid reservoir was empty, now I need to pump it fairly often to keep it up.

Do I just need to bleed the system or could the cylinder be shagged? And how do I go about bleeding it? My last 4b just had a cable clutch so I've never had this sort of problem before.
60 + Turbo, 33"s :armsup:
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

theres a bleed nipple on the slave cylinder under the car, side of bellhousing.

get someone to put foot on clutch, open bleed nipple, close nipple, peddal up

repeat.
03 HDJ100R GXL / 94 FJ45-80
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

bleed

Post by DR Frankenstine »

change out the slave cyl then bleed it
Remember some days your the pigeon and other days your the statue
Top
Posts: 655
Joined: Thu Mar 20, 2008 12:51 pm
Location: melbourne

Post by Jacked »

i would be checking for leaks on the hoses and at the back of the slave and master cylinder as well.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests