Page 1 of 1
Toyota Special Service Tool (part number 09606-60020)
Posted: Tue Jun 16, 2009 9:21 pm
by Morsee
Need to remove steering knuckle to replace seals, FJ45 I need the Toyota Special Service Tool (part number 09606-60020) can any one tell me if they are available in Aus? do I need a second mortgage to buy one? or if anyone has one they want to sell??
Cheers
More brain less speed!
Posted: Tue Jun 16, 2009 9:34 pm
by Weiner
I doubt you would need it, but this guy made his own.
2nd pic down
http://www.rufusthedoofus.com/bj42-stee ... ld-part-1/
Posted: Tue Jun 16, 2009 9:42 pm
by Morsee
Thanks for the info, Looks like I'm off to Bunnings then!!
Posted: Tue Jun 16, 2009 11:14 pm
by lokka
As weiner said id doubt ya will need it the swivel pins will come out fairly easy ive never had a bad one yet and ive done more than i can remember
Posted: Wed Jun 17, 2009 8:13 am
by yamaha__308
I wouldnt bother, the top retainer should come off easily with a few light taps with a hammer, and the bottom retainer can be removed with a few hits from a brass drift through the top hole.
Posted: Wed Jun 17, 2009 2:05 pm
by Morsee
As weiner said id doubt ya will need it the swivel pins will come out fairly easy ive never had a bad one yet and ive done more than i can remember/quote
Just my luck to get the 1 in a million wish I had same luck in lotto
, they have moved so far but stopped short of being able to get it off, I made up a SST as per weiner's link will see if it comes off tonight, be interesting to see how other side comes off.
Thanks for help
Posted: Wed Jun 17, 2009 4:22 pm
by mmaaxx
None left in australia.......if they were they'd be $81 -