Outer Limits 4x4 Board

For those that have dropped their front forward spring mounts, was wondering if anyone could confirm the width apart c-c they should be I remember reading 29" (737mm ) but before i cut mine off i measured 744mm between centres. The perches on the axle measure a tad over 29" c-c was going to weld them on at 740 apart because it is between the measurements.

measure the centre-centre on the shackle end and then the diff and make the front the same or the average i could give u my front hanger measurements but it wood b about 110mm wider than yours so if mines 110mm wider at 850mm that makes your measurement of 740 correct