Page 1 of 1
What light would go in this bar?
Posted: Sun Jun 21, 2009 11:44 am
by paulv
Trying to figure out what indicator light would go in the bar on my sj80 sierra.
None of the options in the narva catalog seem to be the right size.
The lights for TJM bars are definitely different size.
The cut out is about 180mm wide by 70mm high, the distance between the screw hole mounts is about 155mm
Could it be that the lights from a standard Sierra bumper might fit?
Thoughts? comments?
Posted: Sun Jun 21, 2009 12:16 pm
by paulv
Damn it, can't get the image posting to work.
anyway the link is:
http://www.mypicx.com/06202009/sj80_bar
Posted: Sun Jun 21, 2009 1:41 pm
by Spike_Sierra
NSFW due to advertising on the page
edit: advert changes, so not NSFW all the time
Posted: Sun Jun 21, 2009 1:56 pm
by paulv
yep - mypix.com has a small banner add at the top of the page.
Don't know what other site to use for putting up pic - that doesn't require registration/logon etc.
Makes it a bit hard to explain what I am asking without putting up pics.
Anyone know of a 180x70mm indicator?
Anyone know what kind of bar that is? looks like it has been manufactured, rather than home grown.
Posted: Sun Jun 21, 2009 2:10 pm
by VR Rodeo
Posted: Sun Jun 21, 2009 2:49 pm
by paulv
Thanks VR Rodeo
How did you do that - attach the pic?
What was I doing wrong
Posted: Sun Jun 21, 2009 2:58 pm
by VR Rodeo
Posted: Sun Jun 21, 2009 11:11 pm
by paulv
Thank you.
Imageshack - right, will use them in the future.
Now that we can all see what we are looking at, anyone know what light would fit in there?
how big is a standard indicator from the standard front bumper?
180 x 70mm?
Posted: Sun Jun 21, 2009 11:15 pm
by nicbeer
put some small spotlights in there.
Legally as u have a SJ80 with builtiin indicators in the grill u dont need more in the bumper?
Not sure sure on the legal things but sounds good
if not zook orig ones u should be able to get narva or similar ones
Posted: Mon Jun 22, 2009 4:39 pm
by spamwell
looks to me, judging by how the bar doesn't suit the car at all it is designed for the older model sierras, i would say it is designed for the genuine Suzuki indicator Parker assemblies.
Posted: Tue Jun 23, 2009 3:27 pm
by paulv
Thank you.
I have now acquired a left and right indicator/parker assembly - apparently to suit the older model Sierra bumpers.
$35 each new from local wrecker.
Looking at the box, looks like it was imported from India.
- sez it is made by Lumax industries, New Delhi to suit a Maruti Gypsy.
See how we go.
Posted: Wed Jun 24, 2009 10:47 am
by lay80n
paulv wrote:Thank you.
I have now acquired a left and right indicator/parker assembly - apparently to suit the older model Sierra bumpers.
$35 each new from local wrecker.
Looking at the box, looks like it was imported from India.
- sez it is made by Lumax industries, New Delhi to suit a Maruti Gypsy.
See how we go.
If its for a Maruti then its from India, the Maruti Gypsy is a suzuki sierra trayback (or more correctly a bastard mix of suzuki parts that end up imitating a suzuki trayback) in India.
Layto....
