Outer Limits 4x4 Board

hey all wat does it mean when the transfer gear stick keeps geting jamed in gear. the only way to get it un stuck is to take it out and move it around and put it back it. any ideas out there???????



Edit - Fixed spelling and title mistake

Layto....

What vehicle...if its a sierra,could be a transfer shifter bush($20 part)..if you pull your shifter stick out,the ball at the bottom of the stick seats in this bush,and locates the correct position for shifting from 4H to 2H.easy to replace..

zookeenie wrote:What vehicle...if its a sierra,could be a transfer shifter bush($20 part)..if you pull your shifter stick out,the ball at the bottom of the stick seats in this bush,and locates the correct position for shifting from 4H to 2H.easy to replace..

x2 Im with him on this oh and its transfer

Post title edited to avoid confusion.

Layto....

shifting sheet in the t/case is worn out. easy 10 min fix. will fix all ya problems.

B4T

with a worn shifter seat (the bit that sits under the ball in your T/case gear lever) you can still easily use high and low range.
Most people will shift gears in a U shaped pattern cutting the corners, leading to jammed gears if you shift in a |_| without trying to cut the corners it will not jam anywhere near as often if at all.