Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Panard rod length

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 34
Joined: Thu Mar 26, 2009 1:47 pm
Location: gatton qld

Panard rod length

Post by land8079 »

Could some one tell me how to work out the length of my front and rear panards on my 80 to suit a 5 inch lift.
thanks
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

Get adjustables and adjust them so the wheels sit evenly in the guards from left to right.
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

the ideal solution would be to lower the arms so there is very little angle, but this would require the drag link being lowered also (not easy sometimes).
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 18 guests