Page 1 of 1
Notched valve stem used with Stauns
Posted: Tue Jun 23, 2009 11:25 am
by WRXZook
Can someone tell me if the valve stem used to pump the tyre up (not the Staun) is a special item or available at tyre retailers. Where can I get them from?
Thanks
Posted: Tue Jun 23, 2009 1:49 pm
by GUtripper
Yeah, tyre retailers or any auto parts store
Posted: Tue Jun 23, 2009 2:17 pm
by WRXZook
Thank you
Posted: Tue Jun 23, 2009 3:50 pm
by RUFF
You will need to run a grinding disc though the back of it to put the groove in it.
Posted: Tue Jun 23, 2009 4:37 pm
by WRXZook
Well.... I have been to 6 places in Liverpool area and called a couple of 4x4 places and can't get one. They all say you can't get the metal fittings anymore, or have never seen one before.
Just talked to Pete at OPW and sent him some pictures so hopefully he can put me onto some.
Posted: Tue Jun 23, 2009 4:40 pm
by RUFF
WRXZook wrote:Well.... I have been to 6 places in Liverpool area and called a couple of 4x4 places and can't get one. They all say you can't get the metal fittings anymore, or have never seen one before.
Just talked to Pete at OPW and sent him some pictures so hopefully he can put me onto some.
Any place that sells mag wheels should have them.
Posted: Tue Jun 23, 2009 4:57 pm
by WRXZook
I tried Ozzy tyres which is a big seller of high end mag wheels and no go, but will also try others tomorrow depending on Pete's reply. Thanks anyway.
Posted: Tue Jun 23, 2009 4:59 pm
by RAY185
Ring Ryano at Fourbys and I'm sure he'd be happy to mail them to you. He will definately have them.
Posted: Tue Jun 23, 2009 5:07 pm
by WRXZook
This is what I need, or something to do the same job.
