Page 1 of 1
Stock Toy Hi-Lux ratios
Posted: Tue Apr 27, 2004 9:59 pm
by DiscoDino
Just re-assuring...we can get them in:
4.1, 4.56, 4.88, 5.29, 5.71...right? for either the front Hi-Pinion and the rear normal...RIGHT?
Posted: Tue Apr 27, 2004 10:49 pm
by spazbot
5.29, 5.71 were never stock hilux ratios , the 5.29 is avail in hi pinion and low and the 5.71 in just low
5.29 oem was in a hiace comercial van
also 4.3 was a stock option in hiluxs
Posted: Wed Apr 28, 2004 9:09 am
by bubs
spazbot wrote:5.29, 5.71 were never stock hilux ratios , the 5.29 is avail in hi pinion and low and the 5.71 in just low
5.29 oem was in a hiace comercial van
also 4.3 was a stock option in hiluxs
and 3.7s
Posted: Wed Apr 28, 2004 8:27 pm
by DiscoDino
What about on 80s? I know their fronts are Hi-Pinion and I can use them in the Rover...Are the 80s rears like that of Hi-lux's? Do they have compatable ratios?
Thanks again.
Posted: Wed Apr 28, 2004 8:41 pm
by bubs
80 series rears are landcruiser 9 1/4" crown wheels - bigger again - 4.1 ratio
Posted: Wed Apr 28, 2004 9:44 pm
by 96_Lux
22R Petrol are 4.88 standard
Posted: Thu Apr 29, 2004 3:56 pm
by DiscoDino
Ok...Great data here...
One more question:
I need to go with front and rear RD23s (ARB), and I'll be searching for a front 80 Hi-pinion that will fit this...no problems or "options" there...
As for the rear, I need to get a Hi-lux 3rd member, and seeing that these may accomodate the RD01 or the RD23 (variance of 5mm in the bearing sizes appearently), how can I know, other than the fact that the RD23 fits +1988 trucks, that the 3rd member is that of the bigger bearing, accomodating the RD23.
Also (
sorry guys...), when I need to shop for R&P from the US, do I have to get a SPECIFIC hi-pinion set for the front? Are the rears the "4 Cyl." ones of the V^ "Turbo" models (that is the designation I am seeing online for all major manufacturers/retailers).
Thanks again.