Page 1 of 1
will 80 series wheels fit on a 60 series?
Posted: Fri Jun 26, 2009 5:18 pm
by mrgrumpysleeps
i've got some 35 bfg's on american racing alloys and want to put them on my island rig, they were on an 80 series and i want to put them on a 60 series, are pcd's etc the same so they'll slide on?
cheers!!
Posted: Fri Jun 26, 2009 5:41 pm
by v840
Yep, they are the same. You may run in to trouble if you want to run 15s on 80s diffs but nothing a little love with the grinder on the caliper can't work out. In your case though, they'll bolt straight on.
Posted: Fri Jun 26, 2009 6:53 pm
by RUFF
v840 wrote:Yep, they are the same. You may run in to trouble if you want to run 15s on 80s diffs but nothing a little love with the grinder on the caliper can't work out. In your case though, they'll bolt straight on.
He wants to put 80 series wheels on a 60 series not the other way around.
Its possible they may fit straight on. The PCD is the same but the offset is different on an 80 series. If these wheels are 80 series specific they may rub on your Tierod ends.
Posted: Fri Jun 26, 2009 8:19 pm
by dow50r
They will rub.....you may be able to space them with a spacer.
Posted: Fri Jun 26, 2009 8:25 pm
by ORSM45
i got 60 diffs in my 45. i ran 80 series rims for a bit. no rubbing on tierods. they were 5spoke ROH Alloys. im not too sure of the offset.
MaccA
Posted: Fri Jun 26, 2009 9:54 pm
by dow50r
ORSM45 wrote:i got 60 diffs in my 45. i ran 80 series rims for a bit. no rubbing on tierods. they were 5spoke ROH Alloys. im not too sure of the offset.
MaccA
the offset is probably 28 or something, so they will fit 80 and 60....if u try std gxl rims they rub