Outer Limits 4x4 Board

Does any one know where to get one from? Id rather steer clear of toyota.

Wow this is great, what a cool thread
I know a guy on here who may be able to help you
Drop this guy an email Hes way cool and hes got a sic ass Bundy
His user name is beinthemud

I meen post in here sorry

Is there just a generic timer or can you get one to fit my puslux?

But give me time as Ill Have to go to work to find out
And its to dark and scarey out there now

Hang on i may have a book in my car

Would it be a time control relay

0-900 seconds 12v

Dunno but one of those could work. I need one that gois for 10 15 seconds if they make them.

contact open 10a
closed 20a/30a

Drop out delay and also pick up delay

What amps do glow plugs work on, all the gear i work on is too big for glow plugs

Hang on I have another book

Acording to this its
Current in glow time 68 to 76a
current in starting - time 55 to 63a

On an H series

So that relay will be no good then?

Yeah looks to small

Yo wouldnt have half a idea of the price of a new one from yotota would you?

Should be easey to find out
Ill Know tomorow ill get Toyos price and Ill find a generic one

Sweet thanks for that, the jumper wire to the plugs is giving me the sh7ts

Sweet as man

Your lux still got the 2l

Yep ( cue there crap and crack heads and are crap and also there crap)

I hear that alot but never experianced it
But I service my water system alot
and service my engine alot

Same as mine im a mechanic so it gets serviced every 5000 kms and has good coolant in it. 12 psi boost and no dramas yet.

Thermostate every start of winter
New hoses and thermo every two yrs
and third year full radiator service, all gaskets ,coolent, hoses ,thermostate

Oil every 3-5000 ks
first change full flush 1 bottle oil stabilizer and oil ,next change half bottle
next change same then back to first change

I had a couple when engine was first built but was the idiot engine builder
Since found out its the way they machined the block

Kept blowing head gaskets
same place they kept saying i was over heating it
till i told them Id run it through the front of there shop if they said it again
told them they were cr@p
Told them to pull the engine and check the block
so they did found it had a low spot had to be diamond ground
no problem since

No thermostate just $6 filter and shell rimula oil (good enough for trucks good enough for pusslux) Narcool coolant. cops a hidin like a red headed step child.

You like the rimula Im thinking of trying it
What filter
I use HPR 15-50
Were disturbuters for shell and I dont like selling things i havent tryed

Well we are in VIC dont know about anywere else

fleetguard or ryco normally nothing flash. rimula far batter than castrol rx super never tried anything else but oil comes out like oil and not sludge and stays clean for a good 2000 kms before getting really dirty. Its probable over serviced but seems to be going well for what it is.

Not abig fan of ryco
We do FSA ,coopers ,ac delco,Ryco

The Rimula if going by the specs its Higher than most even the turbo spec ones and up to if not better than Particulate matter spec

like i said normally fleet guard (what we put on the trucks) i dont really care what sort of filter is on it. ive got another motor i can put in it if i have to but its not new technology and a dodgy filter will be the least of the problems the motor has.

Who do you get your fleet gaurd from

And what trucks