Page 1 of 1
Whats this ball from? Hilux Gearbox
Posted: Wed Jul 01, 2009 6:02 pm
by Weiner
Hi guys,
Pulled the gearbox off the bellhousing, and out popped this ball bearing.
For the life of me I can't figure out where it goes.
Anyone have any ideas, it came out of whats in the background.
Posted: Wed Jul 01, 2009 6:07 pm
by dogbreath_48
No idea, but it's probably meant to have a spring behind it and makes something click
Maybe that notched shaft on the right?
Posted: Wed Jul 01, 2009 6:09 pm
by Weiner
dogbreath_48 wrote:No idea, but it's probably meant to have a spring behind it and makes something click
Maybe that notched shaft on the right?
Can't find anywhere it will sit.
Have noticed a spring thing in the other half of the case it would go into but not sure how the spring would sit with it
Posted: Wed Jul 01, 2009 6:43 pm
by kane077
Where that notched shaft goes thru the housing there should be an allen key plug that you can remove. Take the plug out and behind that there should be a spring. So when it goes back togather you put the cases together then fit the ball first then the spring then fit the plug.
Posted: Wed Jul 01, 2009 6:46 pm
by Weiner
kane077 wrote:Where that notched shaft goes thru the housing there should be an allen key plug that you can remove. Take the plug out and behind that there should be a spring. So when it goes back togather you put the cases together then fit the ball first then the spring then fit the plug.
Champion, thought so but wanted to make sure
Posted: Thu Jul 02, 2009 12:20 am
by kane077
Too easy mate!