Page 1 of 1
bull bar
Posted: Tue Jul 07, 2009 8:14 pm
by wags
was told that a suzuki serria bull bar will fit a 1990 feroza all you have do is make up new mounts ..... has anyone done this ..... do they fit .... anyone tryed .....
if so im after a steel bar for a serria then
Posted: Tue Jul 07, 2009 8:47 pm
by dai-hard
An ARB bar off a pajero bolted straight onto my rocky
Posted: Thu Jul 23, 2009 8:33 pm
by cookiesa
any chance you would have the model of the bar? (Should be insode the wing if your not sure... or at least what model/year paj and I can find out the bar)
Posted: Wed Jul 29, 2009 9:19 pm
by sxII
Get custom bar made, Mine done by Hazzard Engineering SA cost $650
Posted: Thu Jul 30, 2009 8:23 am
by wags
got one now off rocky alloy $100 from wreckers...
one wrecker had 3bars said they had none so i asked him if i could go look found 2 on rockys 1 on a feroza i got the the best one .
the other rocky bar had different mounts to my feroza but the one i got bolted straight on to the feroza but i did extend the mounts because i have a 2inch body lift ..
Posted: Wed Aug 05, 2009 8:23 pm
by HotFourOk
2004 model Hilux bar bolted onto my Rocky
Posted: Wed Aug 05, 2009 9:44 pm
by 7017
what bar would bolt onto a feroza? are the mounts different to the rocy mounts?
Posted: Thu Aug 06, 2009 11:44 pm
by dferozaII
does anyone have the template for widetrack feroza mounts???
i have brackets for the narrow track but do not fit my widetrack.
any help would be great. cheers