gday, i have a 1hz 97 80 series with standard exhaust, and it's broken. Where the exhaust bolts to the manifold, it's broken right on the exhaust side of the flange, almost like the weld has completely let go. What i want to know is what may have caused this, the exhaust doesnt look corroded and it's not otherwise damaged in any way.
thanks in advance.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
80 series broken exhaust
Moderators: toaddog, Elmo, DUDELUX
vibration has broken it, the flex joint can cause this if it has gone stiff, or been left out of an aftermarket setup, but u say its std...now might be a good time to look for an alternative like turbo or extracters, but the extracters do thesame at the joints...the 1hz gets a wicked harmonic vibe to it at idle...u may wish to increase revs to 800 or so to minimise it
Andrew
Andrew
Confucious say...man who argue with idiot, worserer himself
Who is online
Users browsing this forum: No registered users and 0 guests