Page 1 of 1
E-bay bargain
Posted: Tue Jul 14, 2009 8:29 pm
by mrRocky
I would buy it if it was in w.a.
dont normally post ghay ebay stuff up but this really caught my eye
what are your thoughts
http://cgi.ebay.com.au/Suzuki-Sierra-pr ... 7C294%3A50
Posted: Tue Jul 14, 2009 8:45 pm
by ZUKPOWER
pi$$ the extended shackles off, lower the body a bit and cut the guards and that would be alright i reckon. My knowledge of qld road regs is minimal at best but i dont think that is engineerable though (in qld anyway). Would be a good starting point for anyone in a less Grimace state
Posted: Tue Jul 14, 2009 8:47 pm
by VR Rodeo
Z link Steering arm to be made and installed (Can assist in fab)
Not sure if thats a sign of how the rest of the car has been built
Re: E-bay bargain
Posted: Tue Jul 14, 2009 8:54 pm
by zookimal
It shows the potential of 70s diffs.
Would take a fair bit of effort to get this one sorted.
Posted: Tue Jul 14, 2009 9:37 pm
by jdk81
very easy to understand why the owner got over the project.
probably still needs lots of $ spent, and elbo grease.
Posted: Tue Jul 14, 2009 10:44 pm
by ZUKPOWER
VR Rodeo wrote:Z link Steering arm to be made and installed (Can assist in fab)
Not sure if thats a sign of how the rest of the car has been built
must've missed that bit, i remember how bad my steering was with a z link
Re: E-bay bargain
Posted: Wed Jul 15, 2009 7:32 am
by Gwagensteve
zookimal wrote:It shows the potential of 70s diffs.
Would take a fair bit of effort to get this one sorted.
I reckon all the $$ are yet to be spent on this car.
No tailshafts
No computer
No tuning
No shocks
No lockers
No gears... at all
Sure, there's way more than $1500 worth of parts here, but there's got to be $5K or so in getting in running properly.
Steve.