Page 1 of 1
Rear diff centre in front?
Posted: Mon Jan 27, 2003 9:40 am
by cattzooks
Does anyone know it you can put the rear diff centre in the front. Its a WT 1.3L
Posted: Mon Jan 27, 2003 1:56 pm
by wanna
you can you just have to change the spider gears as the axles are smaller
Posted: Mon Jan 27, 2003 4:16 pm
by cattzooks
Its got a locker in it. Do you mean the side gears? The spider gears got turfed out when the locker went in.
Posted: Tue Jan 28, 2003 9:47 am
by Guy
The front and rear diff are basically the same, but they are not directly interchangeable as the front axle is a 0.94 inch 22 spline unit and the rear is a 1.08 inch 26 spline unit.
Depending on your locker you may be able to swap the side gears. Some model detroits and lockrights can do this (I did it on mine) but some dont ..
Posted: Tue Jan 28, 2003 1:03 pm
by 12uke
Should have keept the gears James
Posted: Tue Jan 28, 2003 9:42 pm
by cattzooks
I did keep the gears. I never through out any zook bits. You just never know when you might need them. I am just thinking of two lockers. The front on mine is the two way diff.