Page 1 of 1
Who knows what this is?
Posted: Fri Jul 17, 2009 6:06 pm
by SIMMO84
I have an oppertunity to get this cheap. The only reason i would be interested is for the diffs to swap into a hilux. As far as i know jeeps have dana diffs? What model/series would they be and are they any good?Would the diffs be stronger than hilux and are they easy enough to get parts, lockers (Mechanical not air) thanks for any help in advance
The hilux is plaanned for a V6 commodore motor and auto box and comp use so will be driven hard.
Posted: Fri Jul 17, 2009 6:33 pm
by TOYROX
Thats a J10 ute.
Dana 60 rear and Dana 44 front.
No worries about parts or lockers all available. Google OX locker.
Plenty of ratios.
Dana 60 are 9.75 inch and stronger then a 9inch ford. Can get 35spline axels 1.5 inch.
dana 44 are 8.75 inch and very strong as well. The open knuckles are much stronger then the toyota or nissan closed knuckle and easier to service. moly axels and CTM uni's also availableif you need them.
The lux won't break them.
Posted: Fri Jul 17, 2009 6:50 pm
by SIMMO84
Wouldnt know what the width is wheel mating surface to wheel mating surface?
Posted: Fri Jul 17, 2009 7:32 pm
by TOYROX
1520mm on the rear diff. 1570mm at the front. Not hard to cut them down.
The jeep would make a much better rig then the Lux.
They are built on a cherokee chassis and a V8 will drop in. The 4 speed will have a granny low gear.
35's will fit and don't look out of place.
Posted: Sat Jul 18, 2009 12:34 pm
by jkrenegade
If you dont want it pm me the details, I have been looking for a j10 for a while.
Posted: Sat Jul 18, 2009 4:24 pm
by SIMMO84
The body is stuffed (rust) maybe if you were keen enough you could cut it all out but theres heaps in every panel, apparently it has a nissan 6cyl turbo diesel in it (not td 42 dunno wat it is tho) and has g/box dramas.
If anyone is interested let me know and i will pass on his details.
Posted: Sat Jul 18, 2009 6:56 pm
by TOYROX
SD33T if it has a turbo. Did not come from factory with turbo only SD33.
PM me details if you can.
Posted: Sun Jul 19, 2009 8:21 am
by Timmy
i'll put my hand up for this too if no onw wants it
Jeep owners details
Posted: Sun Jul 19, 2009 8:35 am
by SIMMO84
Andrew 0415 721 810
Posted: Sun Jul 19, 2009 11:39 am
by TOYROX
It in mackay or it would be in my yard by now.
Posted: Mon Aug 24, 2009 8:57 am
by 76patrol
is this rusty body still layin around?
Posted: Thu Sep 03, 2009 6:21 pm
by SIMMO84
You missed it by about 2 weeks. Is the size of a coffee table about now.
Posted: Sat Sep 05, 2009 7:21 am
by Wooders
SIMMO84 wrote:You missed it by about 2 weeks. Is the size of a coffee table about now.
CRushed it?? What a danged waste
Posted: Wed Sep 09, 2009 6:10 pm
by SIMMO84
yep it was up for grabs for ages, noone here wanted it so it went to the scrappys. Was offered to me free, but didnt want to go to the hassle for what I wanted it for.