Outer Limits 4x4 Board

Posted: **Fri Jul 17, 2009 9:58 pm**

Hi, I am looking for a snorkel head for a 4" snorkel. Both Safari and Airtec are too small. Does anybody know where to get one?

Posted: **Fri Jul 17, 2009 10:12 pm**

truck spares shop

4 inch snorkle head

Posted: **Sun Jul 19, 2009 12:05 pm**

its aford not a nissan wrote:truck spares shop

4 inch snorkle head

Is that donaldson FPG air box the 8.35" housing diameter ? Do you use the inner safety filter in addition to the outer filter?

Posted: **Sun Jul 19, 2009 5:33 pm**

nah i only use the main filter , i have seen a bobcat with the main filter totally ckockers with dirt and the safety filter still looked like new so i figured it wasnt needed

i think it is the donaldson 8 inch air box but cant remember

Posted: **Mon Jul 20, 2009 10:06 am**

Gudday "its a ford not a nissan"

Any chance of a part number/company name where its from etc mate, you got exactly what I need there!

regards garth

Posted: **Mon Jul 20, 2009 12:33 pm**

all parts were sourced from Queensland Diesel Spares , i cant remember the part nos. as it was too long ago and thrown out all the reciepts

Posted: **Mon Jul 20, 2009 2:25 pm**

Thats all I need, thanks...and for further info for others they are approx $140.00 Kiwi. part number H008154

regards garth

Posted: **Mon Jul 20, 2009 4:45 pm**

I've got one floating around in the shed i think.

I'll have a look for you

Posted: **Tue Jul 21, 2009 10:12 am**

Gudday,

That would be much appreciated "B.D.R" .....

regards Garth

Posted: **Tue Mar 23, 2010 6:21 am**

just to update an old thread ,
I've just made a 4" snorkel to my shorty and fitted a Navara Air ram.
I had to stuff around a bit to make it fit , but I think it turned out OK .

and one of the air box as well

Posted: **Tue Mar 23, 2010 7:20 pm**

I can get Airflow ram heads. They make ram heads for trucks too so name your size (or rather, the actual O/D of your snorkel pipe). Can get adaptor sleeves too for odd sizes.

Posted: **Tue Mar 23, 2010 7:51 pm**

shanfab, like the look of the air ram head, what model navara is it off and is it much mucking about? and it is 4"?

Posted: **Tue Mar 23, 2010 8:16 pm**

str8up wrote:shanfab, like the look of the air ram head, what model navara is it off and is it much mucking about? and it is 4"?

Looks like a factory one and no it cant be 4" as it goes inside the 4" tube.

Posted: **Tue Mar 23, 2010 8:18 pm**

str8up wrote:shanfab, like the look of the air ram head, what model navara is it off and is it much mucking about? and it is 4"?

Looks like a factory one and no it cant be 4" as it goes inside the 4" tube.

Posted: **Tue Mar 23, 2010 11:11 pm**

sudso wrote:
str8up wrote:shanfab, like the look of the air ram head, what model navara is it off and is it much mucking about? and it is 4"?
Looks like a factory one and no it cant be 4" as it goes inside the 4" tube.

it's not to bad to do . the OD of the Factory navara air ram is about 94mm.
All I did was rolled a ring that was a tight fit in the ID or the air ram . then another one that went over the outside of the air ram ( prob dosn't make much sence , Sorry )
the outer ring was left unwelded to that when you put a clamp on the outside of the 4" snorkel the second ring can pull up tight against the inner one .
oh and the material thickness was about 2mm .

Posted: **Wed Mar 24, 2010 3:05 pm**

shanfab wrote:just to update an old thread ,
I've just made a 4" snorkel to my shorty and fitted a Navara Air ram.
I had to stuff around a bit to make it fit , but I think it turned out OK .

and one of the air box as well

i like this but needs to be painted black

Posted: **Wed Mar 24, 2010 5:01 pm**

COBURG TRUCK PARTS... hume hwy sommerton vic 9308 0088

Outer Limits 4x4 Board

Snorkel head (air ram) to suit 4" snorkel

Snorkel head (air ram) to suit 4" snorkel