Page 1 of 1
diff lamination
Posted: Mon Jul 20, 2009 4:04 pm
by GIVEITABIT
Is there anything wrong with welding 25mmx25mm angle 5mm thick to the underside of the diff?
cheers
Re: diff lamination
Posted: Mon Jul 20, 2009 5:51 pm
by TEAMRPM
GIVEITABIT wrote:Is there anything wrong with welding 25mmx25mm angle 5mm thick to the underside of the diff?
cheers
If you are going to weld that on the diff tube youl need to watch how much heat you put into the welds. its best if you strip the housing and get it done right or bend up some steel to suit the profile of the housing.
Posted: Mon Jul 20, 2009 6:26 pm
by nastytroll
That will not do much exept bite into what every drive across.
Best do it right first time.
Posted: Tue Jul 21, 2009 8:30 pm
by misstown
buy a kit from superior engineering.guys who use angle and do bodgy shit make it hard on the rest of us who do things the right way
Posted: Tue Jul 21, 2009 9:59 pm
by KYSI
misstown wrote:buy a kit from superior engineering.guys who use angle and do bodgy shit make it hard on the rest of us who do things the right way
Lol i dont understand how someone doing a bodgey job with angle makes it hard for you?
Posted: Tue Jul 21, 2009 10:00 pm
by KYSI
oh and get a superior kit, its well worth it.
Posted: Thu Jul 23, 2009 3:02 pm
by garth
cause ya spend the whole day out towing the F@#ckers out of the bush!!!!