Outer Limits 4x4 Board

Posted: **Tue Jul 21, 2009 5:07 pm**

I just wonna try do the right thing..

Posted: **Tue Jul 21, 2009 5:13 pm**

Contact the QLD RTA and get their list

Posted: **Tue Jul 21, 2009 6:01 pm**

Thanks mate!!

Posted: **Wed Jul 22, 2009 1:36 am**

grimbo wrote:Contact the QLD RTA and get their list

yeah right.. half of them do not do it anymore and the other half will not return calls let alone talk in the first place.. any wonder there are so many illegal 4wds in qld..

cheers mark

Posted: **Wed Jul 22, 2009 2:21 pm**

You don't need engineers 99% of the time.

What do you need done?

Blue plates cover almost everthing

Posted: **Wed Jul 22, 2009 3:05 pm**

ls1 in a gq??
I am looking to rego one in qld that doesnt yet have a cert from the other state. All professionally done, he just hadnt done it yet.

Posted: **Wed Jul 22, 2009 3:11 pm**

Too easy, cost you $77 at an aproved person.

you DO NOT need an engineer for this. I have done it several times

cheers bru

Posted: **Wed Jul 22, 2009 4:04 pm**

What Bru said. You need an approved officer to inspect and issue you with a mod plate. These are basically mechanics authorised by QLD Transport to issue mod plates.

If you have a mechanic you use they should know someone, or you can call QLD transport and ask who is nearby who can approve engine swaps.

Posted: **Wed Jul 22, 2009 4:37 pm**

5'' lift and 35's.. I know ther's lots of shit going down at the moment with this kind of thing, but It would be good if it were possable????

Posted: **Wed Jul 22, 2009 4:45 pm**

mickdirt wrote:5'' lift and 35's.. I know ther's lots of shit going down at the moment with this kind of thing, but It would be good if it were possable????

sorry not in queensland

cheers

Posted: **Wed Jul 22, 2009 5:03 pm**

mickdirt wrote:5'' lift and 35's.. I know ther's lots of shit going down at the moment with this kind of thing, but It would be good if it were possable????

You are kidding???

2" body lift is max possible, and needs to be approved by QLD transport directly.

~2" max spring lift (actually 1/3 of stock distance between axle and bump stop)

15mm increase in tyre size. Does not need approval.

Posted: **Wed Jul 22, 2009 6:52 pm**

if you want to speak to an engineer try
livingstone engineers
lindsey stone he is based in townsville but does travel he is on the sunny coast at the moment
ph 0438748807 /wk 0747748807

Posted: **Wed Jul 22, 2009 8:10 pm**

I've been told it's possable.. But wonted to find out more..

Outer Limits 4x4 Board

Is there any engineers in QLD????

Is there any engineers in QLD????