Page 1 of 1

Bruce Davis Twin Throttle body manifold

Posted: Mon Jul 27, 2009 6:38 pm
by GTSbobo
GDay guys

Im new to the forum but have had a few Rangies over the years inc a comp truck.

I have a Bruce Davis twin throttle body plenum on a 4.6 manifold Im thinking of selling as I am building up another truck and was thinking of using a Bosh Thor manifold instead.

The question I suppose is what would the twin throttle body manifold be worth? (if anyone was interested) as they are hard to get, unless you wanted to go to the trouble of making one yourself!.


Cheers Gavin

Re: Bruce Davis Twin Throttle body manifold

Posted: Mon Jul 27, 2009 6:57 pm
by nottie
GTSbobo wrote:GDay guys

Im new to the forum but have had a few Rangies over the years inc a comp truck.

I have a Bruce Davis twin throttle body plenum on a 4.6 manifold Im thinking of selling as I am building up another truck and was thinking of using a Bosh Thor manifold instead.

The question I suppose is what would the twin throttle body manifold be worth? (if anyone was interested) as they are hard to get, unless you wanted to go to the trouble of making one yourself!.


Cheers Gavin
ok to help you out i would say about $20.00 and i will take it off your hands ;)

Honestly i wouldnt have a clue. some pics might help :?:

Posted: Mon Jul 27, 2009 7:31 pm
by GTSbobo
If I knew how to post pics mate I would give it a go but dont have a clue how. Can email some if someone else wants to post them up.

Cheers

Posted: Mon Jul 27, 2009 7:49 pm
by stuee
Is it for 4wd application or street/race performance?? You might get better (ie more accurate) responses on a more race/street car/ British orientated forum. Either that or chimboy with his bunky old TR7 or whatever it is will buy it :finger:

Posted: Mon Jul 27, 2009 8:04 pm
by GTSbobo
Sorry guys

The manifold is currently fitted to a 87 Range Rover HiLine I have just purchased. The engine it is fitted to is a fully balanced and blue printed late mod 4.6ltr cross bolt mains running a Haltec ECU custom extractors etc etc etc that was built by Bruce Davis ( Davis Performance Landys).

The reason I want to sell it is I am building up another comp truck using this engine along with other parts that I will take of the 87 Rangie ( Lt230t etc etc) and will fit to the 90 mod Vogue I also have. The reason for the change of mainfold is I will have more room under the bonnet for other bits and pices if I only have one air cleaner not two.

Might also have an R380 to get rid of as well.

I hope this makes things a bit clearer

Cheers

Posted: Tue Jul 28, 2009 8:31 am
by GRIMACE
I may be interested if the price is right :D

Posted: Tue Jul 28, 2009 11:17 am
by chimpboy
stuee wrote:Is it for 4wd application or street/race performance?? You might get better (ie more accurate) responses on a more race/street car/ British orientated forum. Either that or chimboy with his bunky old TR7 or whatever it is will buy it :finger:
lol indeed I'd be interested, but I have stuffed around too much fitting the discovery gear to want to start over just yet :)