Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Drop boxes

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 172
Joined: Thu Aug 09, 2007 7:03 pm
Location: Torbanlea QLD

Drop boxes

Post by Burdy »

Ive recently fitted dropboxes to my Gu ute and wondering if u grind or modify the big washer on the back of the arm, the reason im asking is because there is only about a 5mm gap between the washer and the top of the drop box
Any pics or info would be greatly appreciated
cheers Ian

Image
MUD BEERS & MAYHEM 4x4 and SOCIAL Group
5 inch lift,33 MTZ's,240 XGT's,3 inch dump & exhaust and more to come
Top
Posts: 474
Joined: Thu Apr 24, 2008 7:31 pm
Location: Canberra

Post by A.J. »

Yeah, I ground some material off these washers but they keep rotating so it doesn't really help unless you take a few mm off all round.
2001 GU Patrol DX wagon, TD42, Air Lockers, twin spare carrier, Barrett HF, 35" Treps, high pinion rear, Staun beadlocks, 60l Engel and more!
Top
Posts: 211
Joined: Sat Jun 19, 2004 1:32 pm
Location: Endeavour Hills - Vic

Post by cmcd »

Mine touch and then squeak.. :x

I'll be getting the grinder out on Saturday.
Macca

[url=http://tinyurl.com/6ok59d]1990 GQ Patrol[/url] - 4" & 33's
[url=http://www.4bfabrications.com.au]4B Fabrications[/url]
Top
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

Dunno what brand you have, but the Superior ones have fitting instructions and they say to cut part of the washer off.
Top
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

A.J. wrote:Yeah, I ground some material off these washers but they keep rotating so it doesn't really help unless you take a few mm off all round.
Dammit I wish I had read your post the other night, I just fitted my boxes tonight and only ground them flat not all the way around! :x
Top
Posts: 413
Joined: Sun Apr 27, 2008 8:41 am
Location: South Is, NZ

Post by twodiffs »

x2 with Superior's. I just cut part of the washer as per instructions, they have not moved at all to this day.
1991 GQ TD42 Safari, 5spd, 4" Lift, 35" shovels, Locked & Loaded.
Top
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

What caster readings to people have with drop boxes? I wheel aligned mine today after fitting all the suspension and it had about half a degree positive caster, I was expecting a bit more?? It has Dobinsons 4" progressive coils.
Top
Posts: 156
Joined: Thu Feb 14, 2008 5:18 pm
Location: brisbane/Logan

Post by biggsy »

If there superior, you cut no more than 10mm of each washer.. Fitted mine today.
v8-gq
Top
Posts: 172
Joined: Thu Aug 09, 2007 7:03 pm
Location: Torbanlea QLD

Post by Burdy »

biggsy wrote:If there superior, you cut no more than 10mm of each washer.. Fitted mine today.
Did u cut all the way around or just where it hits the drop box
MUD BEERS & MAYHEM 4x4 and SOCIAL Group
5 inch lift,33 MTZ's,240 XGT's,3 inch dump & exhaust and more to come
Top
Posts: 474
Joined: Thu Apr 24, 2008 7:31 pm
Location: Canberra

Post by A.J. »

I have had a look under my truck just now and one side has rotated a bit but not much so I think you would be safe to just cut on one side.
I thought they have rotated more from memory.... :oops:
2001 GU Patrol DX wagon, TD42, Air Lockers, twin spare carrier, Barrett HF, 35" Treps, high pinion rear, Staun beadlocks, 60l Engel and more!
Top
Posts: 156
Joined: Thu Feb 14, 2008 5:18 pm
Location: brisbane/Logan

Post by biggsy »

Just go down 10mm from any where on the washer and cut straight across so you end up with a flat edge on the washer
v8-gq
Top
Posts: 413
Joined: Sun Apr 27, 2008 8:41 am
Location: South Is, NZ

Post by twodiffs »

x2 as above.
1991 GQ TD42 Safari, 5spd, 4" Lift, 35" shovels, Locked & Loaded.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 64 guests