Page 1 of 1
Need a Feroza power steer pump Melbourne urgently...
Posted: Sat Aug 01, 2009 2:32 pm
by Goatse.AJ
Anybody in Melbourne happen to have a spare Power Steering pump they're willing to part with? Or know where I can get one this weekend?
Any help greatly appreciated.
I had a spare, but when I went to fit it, found all the brackets and bolt patterns are different = no go
Posted: Mon Aug 03, 2009 1:29 am
by monmendoza
Why not just overhaul the power steering ? There are repair kits
available and in most probability replacing the o rings and diaprahm
will make it work like brand new.
Posted: Mon Aug 03, 2009 11:35 am
by Goatse.AJ
Yeah, I've considered pulling the "new" one apart and doing just that with the bits from it, but the issue is time/money/convenience....
Posted: Sat Aug 29, 2009 4:58 pm
by Goatse.AJ
Ok, so Applause pump and brackets are quite different
I have a couple of Applause pumps and all the brackets, but the standard Feroza belt is too long if I o that route. Has anybody fitted an Applause pump and found a suitable belt???
Standard Applause setup is very different and the belt just won't do the job.