Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
thread/fitting for oil drain and oil feed
thread/fitting for oil drain and oil feed
been searching for what size and thread fittings i will need for the oil drain and feed im useing the one from the filter houseing/oil pump and using the grub in the exhaust side of the block as the return. just wanting to get all the parts and fittings before i start to pull it apart so your help would be great cheers tye.
gq coil cab with stuff
mate the grub screw you are wantin to use as a drain on the exhaust side, can-not be used as a drain as that is the usual oil feed point.
so ur better of taking you oil feed from there and tapin a hole ine the sump for your drain. or if your after a dodgy but still works theme, you can use a 'T' peice off the altinator drain as a drain.
each to their own....
p.s use the search button
so ur better of taking you oil feed from there and tapin a hole ine the sump for your drain. or if your after a dodgy but still works theme, you can use a 'T' peice off the altinator drain as a drain.
each to their own....
p.s use the search button
89 4.2tdt pootrol,w-a,3inch spring,bar-reparing,83%ers,4.6, arb front & noslip rear, 35's
tree mended guards
tree mended guards
Who is online
Users browsing this forum: No registered users and 0 guests