Page 1 of 1
td42 freshen up
Posted: Tue Aug 04, 2009 6:40 pm
by waandy
i have bought a td42 and am going to freshen it up for a turbo. i will strip it down and c whats in need of a reco. i thought itd probably need a set of rings, hone the liners or even a new set, and bottom end bearings. what would be the rough cost of this and are these the fairly common things to do?
Re: td42 freshen up
Posted: Tue Aug 04, 2009 9:41 pm
by bogged
waandy wrote:i have bought a td42 and am going to freshen it up for a turbo. i will strip it down and c whats in need of a reco. i thought itd probably need a set of rings, hone the liners or even a new set, and bottom end bearings. what would be the rough cost of this and are these the fairly common things to do?
See Roodogs on Ebay... they do kits for all patrols Im sure..
Posted: Sat Aug 08, 2009 8:31 am
by garth
gudday
I wouldn't bother honing if there's bad wear, go the new liners as there's is very little play with until you'll strike water!
set of good pistons, rings and liners over here are about $2300.00 + gst and that's with 2 left over as the TD27 kits come in sets of 4 only.
the bearing shells are extra
good luck