Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Front axle seal size for GQ and GU Please

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Front axle seal size for GQ and GU Please

Post by Willy Hilux »

Can someone help out with the inner axle seal for the front diff please for the GQ and GU. OD and ID would be good.

I want to make up a tool to knock these in straight. Look in the for sale section at the hilux one I've made up.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 771
Joined: Wed Jun 23, 2004 9:34 pm
Location: greensborough, vic

Post by big bundy »

44mm on the OD on the steel part, and 30.5 ID on the rubber. measured with a rule, don't have a vernier here.

I'd be interested in one!
bundy's suck ass
LWB patrol's are where its at!
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Cheers, Is that GQ or GU or are they the same??

30.5mm is small. Hilux have larger axles then Nissan's. They must be weak.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 771
Joined: Wed Jun 23, 2004 9:34 pm
Location: greensborough, vic

Post by big bundy »

thats for a GQ i don't think GU's are the same.
bundy's suck ass
LWB patrol's are where its at!
Top
Posts: 474
Joined: Thu Apr 24, 2008 7:31 pm
Location: Canberra

Post by A.J. »

Yep they are the same. We just checked last weekend.
I have some in my toolbox but no verniers either.
2001 GU Patrol DX wagon, TD42, Air Lockers, twin spare carrier, Barrett HF, 35" Treps, high pinion rear, Staun beadlocks, 60l Engel and more!
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Can some confirm this measurement above???
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests